尊龙凯时·「中国」官方网站

    尊龙凯时(江苏)电气有限公司
      当前位置:
    • 首页>
    • 产品中心>
    • 抗谐型智能电容器>
    • AMT-Z系列抗谐型智能电容器

    取消

    清空记录

    历史记录

    清空记录

    历史记录

    清空记录

    历史记录

    AMT-Z系列抗谐型智能电容器

    分享到微信

    ×
    AMT-Z系列抗谐型智能电容器是在0.4kV系统中用来抑制谐波、降低线损、提高功率因数和电能质量的新一代产品。替代常规由智能无功补偿控制器、熔丝、投切开关、电抗器及电容器等散件在柜内组成的无功补偿装置。具有体积小、安装方便,易于维护,补偿高效,性能稳定可靠等优点,适应电网谐波含量高和对无功补偿有更高要求的现代配电网。
    在线客服
    产品详情

      1、概述 /Overview

      

    AMT-Z系列抗谐型智能电容器是在0.4kV系统中用来抑制谐波、降低线损、提高功率因数和电能质量的新一代产品。替代常规由智能无功补偿控制器、熔丝、投切开关、电抗器及电容器等散件在柜内组成的无功补偿装置。具有体积小、安装方便,易于维护,补偿高效,性能稳定可靠等优点,适应电网谐波含量高和对无功补偿有更高要求的现代配电网。


      AMT-Z series Anti-harmonic Intelligent Capacitor is a new generation of efficient and energy-saving reactive compensation device applied in 0.4 KV low-voltage distribution network for suppressing the harmonic and improving the power factor, replacing the traditional reactive compensation device composed of intelligent reactive compensation controller, fuse, switch, filter reactor, power capacitor and other parts. The anti-harmonic intelligent power capacitor is designed for the high harmonic content power grid and the condition that the conventional intelligent capacitor can not operate properly, which can not only meet the reactive compensation and improve the power factor, but also suppress the influence of corresponding order harmonic on the capacitor and improve the electrical quality.

      2、型号说明/Model Description

      抗谐型智能电容器型号.png

        3、常用型号列表/List of Common Models



    补偿方式

    Compensation Mode

    7% 系列规格

    7% Series Specification

    14% 系列规格

    14% Series Specification

    额定容量(kvar)

    Rated Capacity (kvar)

    外形尺寸(W×H×D)mm

    Overall Dimensions (W×H×D)mm

    安装尺寸(W1×D1)mm

    Mounting Dimensions (W1×D1)mm

    三相共补

    Three-phase compensation

    AMT-Z-480/40-7%-T

    480/40/7%

    525/40/14%

    40

    175×419×495

    110×475

    480/30/7%

    525/30/14%

    30

    175×419×495

    110×475

    480/20/7%

    525/20/14%

    20

    175×419×495

    110×475

    分相补偿

    Split-phase compensation

    AMT-Z-280/40-7%-S

    280/30/7%

    300/30/14%

    30

    175×419×529

    110×509

    280/25/7%

    300/25/14%

    25

    175×419×529

    110×509

    280/20/7%

    300/20/14%

    20

    175×419×529

    110×509

    280/15/7%

    300/15/14%

    15

    175×419×529

    110×509

    280/10/7%

    300/10/14%

    10

    175×419×529

    110×509


      注:安装尺寸为 110mm×475(509)mm 两台电容器安装间距 ≥ 00mm,

      Note: The mounting dimensions are 110mm×475(509)mm. The mounting distance between the two capacitors is more than or equal to 00mm.

    • AMT-Z系列抗谐型智能电容器

    AMT-Z系列抗谐型智能电容器

    分享到微信

    ×
    AMT-Z系列抗谐型智能电容器是在0.4kV系统中用来抑制谐波、降低线损、提高功率因数和电能质量的新一代产品。替代常规由智能无功补偿控制器、熔丝、投切开关、电抗器及电容器等散件在柜内组成的无功补偿装置。具有体积小、安装方便,易于维护,补偿高效,性能稳定可靠等优点,适应电网谐波含量高和对无功补偿有更高要求的现代配电网。
    0515-82327185
    在线客服
    产品详情

      1、概述 /Overview

      

    AMT-Z系列抗谐型智能电容器是在0.4kV系统中用来抑制谐波、降低线损、提高功率因数和电能质量的新一代产品。替代常规由智能无功补偿控制器、熔丝、投切开关、电抗器及电容器等散件在柜内组成的无功补偿装置。具有体积小、安装方便,易于维护,补偿高效,性能稳定可靠等优点,适应电网谐波含量高和对无功补偿有更高要求的现代配电网。


      AMT-Z series Anti-harmonic Intelligent Capacitor is a new generation of efficient and energy-saving reactive compensation device applied in 0.4 KV low-voltage distribution network for suppressing the harmonic and improving the power factor, replacing the traditional reactive compensation device composed of intelligent reactive compensation controller, fuse, switch, filter reactor, power capacitor and other parts. The anti-harmonic intelligent power capacitor is designed for the high harmonic content power grid and the condition that the conventional intelligent capacitor can not operate properly, which can not only meet the reactive compensation and improve the power factor, but also suppress the influence of corresponding order harmonic on the capacitor and improve the electrical quality.

      2、型号说明/Model Description

      抗谐型智能电容器型号.png

        3、常用型号列表/List of Common Models



    补偿方式

    Compensation Mode

    7% 系列规格

    7% Series Specification

    14% 系列规格

    14% Series Specification

    额定容量(kvar)

    Rated Capacity (kvar)

    外形尺寸(W×H×D)mm

    Overall Dimensions (W×H×D)mm

    安装尺寸(W1×D1)mm

    Mounting Dimensions (W1×D1)mm

    三相共补

    Three-phase compensation

    AMT-Z-480/40-7%-T

    480/40/7%

    525/40/14%

    40

    175×419×495

    110×475

    480/30/7%

    525/30/14%

    30

    175×419×495

    110×475

    480/20/7%

    525/20/14%

    20

    175×419×495

    110×475

    分相补偿

    Split-phase compensation

    AMT-Z-280/40-7%-S

    280/30/7%

    300/30/14%

    30

    175×419×529

    110×509

    280/25/7%

    300/25/14%

    25

    175×419×529

    110×509

    280/20/7%

    300/20/14%

    20

    175×419×529

    110×509

    280/15/7%

    300/15/14%

    15

    175×419×529

    110×509

    280/10/7%

    300/10/14%

    10

    175×419×529

    110×509


      注:安装尺寸为 110mm×475(509)mm 两台电容器安装间距 ≥ 00mm,

      Note: The mounting dimensions are 110mm×475(509)mm. The mounting distance between the two capacitors is more than or equal to 00mm.

    选择区号
    • 尊龙凯时客服
    友情链接: